| Dimensions (L x W x H) |
56 x 61 x 107 cm
(22" x 24" x 42") |
55.88 x 61 x 106.68 cm
(22” x 24” x 42”) |
| Air Changes per Hour |
Max 9,000 ft³ @ 6 ACH |
6 ACH @ max 9,000 ft |
| Airflow |
300-900 CFM |
300-900 cfm |
| Net Weight With Filters |
70 lb |
70 lb |
| Shipping Weight |
95 lb |
95 lb |
| Shipping Dimensions |
Max 9,000 ft³ @ 6 ACH |
N/A |
| Power Supply Requirements |
120 VAC, 60Hz, 15 A |
12 VAC, 60 Hz, 15 A |
| Circuit Breaker |
12 A |
12 A |
| Electrical Safety |
NRTL-certified to comply with UL Std. 507 &
CAN/CSA Std. #C22.2 No. 113-M1984 |
NRTL-certified to comply with UL Std. 507
& CAN/CSA Std. #C22.2 No. 113-M1984 |
| Cabinet Material |
UL94HB flame retardant resin with EPA-Registered
microbial inhibitor |
UL94HB flame retardant resin with EPA-Registered
microbial inhibitor |
| Pre Filter Access |
Hinged door secured by rotating latches.
Full perimeter gasket seals to protect against
bypass of dirty air |
Hinged door secured by rotating latches.
Full perimeter gasket seals to protect against
bypass of dirty air |
| Stage 2 Pre_Filter |
2 Pleated particulate
pre-filter (MERV 8) |
UV-resistant 2 pleated particulate
pre-filter (MERV 8) |
| Stage 1 Pre-filter |
1 Coarse particulate pre-filter
(MERV 4) |
1 coarse particulate pre-filter
(MERV 4) |
| Stage 3 optional pre-filter |
VAPOR-LOCK carbon filter (MERV 7)
or a second 2 pleated particulate pre-filter
(MERV 4) |
N/A |
| Carbon Filter |
NRTL-certified to comply with UL Std. 507 &
CAN/CSA Std. #C22.2 No. 113-M1984 |
N/A |
| Final stage HEPA filter |
HEPA filter - Long-life true HEPA tested
and certified to an efficiency of 99.97%
or higher for 0.3 micron particles |
Long-life true HEPA tested
and certified to an efficiency of 99.97%
or higher for 0.3 micron particles |
| Inlet Outlet Manifold |
1 Coarse particulate pre-filter
(MERV 4) |
N/A |
| Pre Filter Mounting |
Hinged access door (no tools) |
Hinged access door (no tools) |
| Operational Sound Level |
2 Pleated particulate pre-filter (MERV 8) |
N/A |
| Transportability |
Built-in dolly with solid handle rolls easily on the job
with one worker on 8” diameter smooth,
non-marking rear wheels |
Built-in Dolly - Two-wheel dolly consisting of 8 solid,
non-marking
rubber rear wheels, 360 degree swivel
front casters and a secure
top handle for gripping |
| Water Removal |
HEPA filter - Long-life true HEPA tested and certified to
an efficiency of 99.97%
or higher for 0.3 micron particles |
N/A |
| Air Inlet |
VAPOR-LOCK Carbon filter (MERV 7)
or a second 2 pleated particulate pre-filter (MERV 4) |
N/A |
| Motorized Impeller |
Rated for 100,000 hours with thermal
overload protection, auto reset,
60Hz, single-phase |
Motorized impeller rated for 100,000 hours with
thermal overload protection,
auto reset, 60Hz, single-phase |
| Built in Dolly |
Two-wheel dolly consisting of 8" solid,
non-marking rubber rear wheels, 360 degree
swivel front casters
and a secure top handle for gripping |
Two-wheel dolly consisting of 8" solid,
non-marking rubber rear wheels,
360 degree swivel front casters
and a secure top handle for gripping |
| Lamp Type |
N/A |
UVGI, 39 W total output |
| Amperage |
3.5 A or less
(Daisy-chain multiple units on one 15 A circuit) |
3.5 A or less
(Daisy-chain multiple units on one 15 A circuit) |
| Certifications |
NRTL-certified to comply with UL Std. 507 &
CAN/CSA Std. #C22.2 No. 113-M1984 |
NRTL-certified to comply with UL Std. 507 &
CAN/CSA Std. #C22.2 No. 113-M1984 |
| Third Stage Pre Filter |
N/A |
An internally mounted,
39-W, UVGI lamp located below
the pre-filters in a single module |
